Welcome to Ningbo Yuxin metal products Co., Ltd!

ES | Sitemap | RSS | XML

Ningbo laser cutting

Laser cutting in Ningbo
Your current location : Home >> Products >> Metal screen

Contact Us

Ningbo Yuxin metal products Co., Ltd

Mobile phone: 18968394899

Tel: 0574-87727344

Fax: 0574-89259368

Web: en.yuxinmade.com

Address: No.35, Gongsi Road, Zhuangshi street, Zhenhai District, Ningbo


High end metal screen

High end metal screen

  • Category:Metal screen
  • Views:Times
  • Release date:2020-08-12 14:08:22
  • Description
  • Characteristics
  • Parameter

The screen partition can be divided into hollow carving screen partition deep relief pattern screen partition.

Screen partition is commonly used in hotel dining room box, hotel lobby, office conference hall other venues. Super large screen partition is used in bid section 35F of Baiyue hotel in Hangzhou.

In this project, super large screen partition is divided into three types: glass screen, wood screen partition metal screen.

According to the site engineering drawings, determine the installation position of decoration partition, use level to assist setting out, fix 200 * 200 * 8 hot-dip galvanized steel plate with B12 expansion screw at the position on the matching secondary structure, make one every 1m. The 50 * 50 galvanized square tube is welded by electric welding, the main keel is fixed on the main keel on the ceiling. The steel plate laser cutting electric welding welding are used to generate the structure. According to the size of each layer of wood veneer, the horizontal bar steel frame structure is welded by electric welding, the door leaf is embedded, finally straightened with the level gauge. Then, the finished metal material decorative panel is used to decorate design the steel keel frame.

Installation of groove plate of wood decorative panel

Installation of vapor barrier: waterproof measures must be carried out before the construction of wooden wall. The method of laser cutting steam barrier is to brush two water asphalt roads on the base plate main keel.

According to the provisions of the construction drawings, the surface leveling of the rural base course, the vertical elevation of the building the square of the external corner line shall be checked on the prepared keel frame. The frame material used in rural base course of metal material decoration panel must be dry dry. If high-quality metal material is used, its flatness glue cutting practice must meet the requirements.

Choose the pattern wood straight hair splint, separate out different colors, lines, cut materials according to the requirements, try to assemble the wood veneers with the same color similar wood texture together. Naturally, the wood texture connection should be harmonious, the boards with uneven burr should be adjusted leveled at the four sides. For few boards, the base plate should be made first then pasted. The wood veneer of cold water paint panel should be reduced as far as possible Few top edges are closely connected. The wood decorative panel should be painted with three sides of fire-proof paint on the reverse side. In addition, the paint machine must be used before cutting to prevent cracking, which is conducive to cleaning. During the construction of the project, it is necessary to prevent the surface being scratched part of the bearing capacity, hammering is prohibited. High end straight hair splint engineering construction workers wear white gloves practical operation.

高端金属屏风

label

Previous:laser cutting2020-08-12
Next:Custom metal screen2020-08-12

Recently Viewed: