Welcome to Ningbo Yuxin metal products Co., Ltd!

ES | Sitemap | RSS | XML

Ningbo laser cutting

Laser cutting in Ningbo
Your current location : Home >> Products >> Metal screen

Contact Us

Ningbo Yuxin metal products Co., Ltd

Mobile phone: 18968394899

Tel: 0574-87727344

Fax: 0574-89259368

Web: en.yuxinmade.com

Address: No.35, Gongsi Road, Zhuangshi street, Zhenhai District, Ningbo


Laser cutting  carving

Laser cutting carving

  • Category:Metal screen
  • Views:Times
  • Release date:2020-08-12 14:06:37
  • Description
  • Characteristics
  • Parameter

Laying nail base plate: the base plate is 8mm thick CCA board, which is fixed on the rural base frame with high strength swallow tail wire, the nail head should enter into the board. The gap between plates shall be built at the channel steel, the surface shall be free shrinkage peeling, shall be leveled cleaned.

Mirror glass installation: there are five common ways to fix the mirror glass: screw fixation, nail fixation, bonding fixation, pressing bonding shoulder. In this project, the method of close combination of supporting pressure fixation bonding shoulder fixation is selected.

Common problems of laminated glass installation:

Before installing the mirror glass laminated glass, the stains inside the cutting mouth should be removed cleaned.

The mirror glass laminated glass with long side more than 1.5m longer side more than 10m shall be installed. Rubber plate shall be used for 3D laser cutting fixed with decorative strip screw.

When installing mirror glass laminated glass, appropriate gap should be left on the top of the wall of the upper frame to avoid structural deformation damage of mirror glass laminated glass by laser cutting.

After the laminated glass is installed in place, its edge shall touch the frame, fan connecting parts, the gap shall be 2-2mm. The laminated glass of mirror glass shall be embedded into the frame fan to plug fill with raw materials. When inserting the strip, the bearing force near the laminated glass shall be uniform. When sealing the seam with sealing paste, the total width depth of the sealing paste shall meet the requirements of the design scheme. The compactness surface of the sealing paste must be ensured It should be leveled smooth.

激光切割雕刻

label

Previous:Metal stainless steel screen2020-08-12
Next:laser cutting2020-08-12

Recently Viewed: