Aluminum aluminum alloy are suitable for continuous laser cutting. Although it has high transmittance thermal conductivity, aluminum profiles with thickness less than 6 mm can be cut by laser, which depends on the type of aluminum alloy the working ability of laser generator. Aluminum can be cut by oxygen laser high pressure nitrogen laser

When oxygen laser cutting, the laser cutting surface is smooth hard. But a fire cannot be removed.

——When N2 is used by stainless steel cutting manufacturer, the surface of laser cutting is smooth. When the plate is less than 2mm, the actual burr free cut can be obtained by adjusting the cutting price of stainless steel. For thicker plates, there will be burrs that cannot be removed.

-Pure aluminum is difficult to be cut by laser because of its high purity. The higher the composition of aluminum alloy, the easier laser cutting of raw materials.

Proposal: laser cutting of aluminum profiles can be carried out only when the "digestion absorption of reflector" equipment is installed on the system software. Otherwise, the reflector will damage the electron optical components.

Continuous laser cutting is also called CW (continuous wave) laser cutting method. The continuous laser cutting method is a way to continuously generate the oscillation output then carry out laser cutting. In laser cutting high carbon steel, it is the way of laser cutting rate.